Skip to main content

Painted fabric quilt - part four



Last week, I showed you the process of piecing my painted silk quilt.  My next step was to add paint embellishments to the surface; this included adding interference paint with a dry brush around some leaves up near the top of the quilt, and adding a very light application of copper foil to some of the lower (and darker) pieces of fabric.  



As soon as all top-stitching and embellishing was complete, it was time to square the quilt off a bit and pin the edges.  I decided not to cut all the fabrics exactly even with each other, but rather to allow the outer edge to be just a bit ragged.



I added a backing fabric, re-pinning the edges.  This backing is the only commercial fabric in the entire piece, and next I clipped the batting and backing even with the top.  




 Here's what the backing fabric looks like.  You can see that most of the edges have now been stitched with a single strand of light-colored embroidery floss, using the same blanket stitch as I used for the piecing. 

Part one
Part two
Part three
Part four
Part five
Copyright 2011 Cyndi Lavin. Not to be reprinted, resold, or redistributed for profit. May be printed out for personal use or distributed electronically provided that entire file, including this notice, remains intact.

Technorati Tags:,,,,,,

Comments

This is so pretty, Cyndi. I've been following your progress and am just dying (get it? dye-ing. lol) to see the finished piece.