Sometimes I actually get around to using the samples that I create for tutorial purposes in an actual project...and this is one of those times ;-)
In March, I shared with you a book review of Shelly Stokes's new book, Rubbing Plate Roundup, and I showed you some fabric that I stamped and foiled using her methods. Well, I saw the fabric sitting on my work table next to some other fabrics, and the next thing you know, I was cutting out a small geometric quilt.
Materials and Tools
2 pieces of black felt
1 piece of brightly colored cotton (pink)
1 piece of hand-painted fabric (yellow, orange, and pink with foil)
1 piece of fusible interfacing, shirt-weight
1. Cut the felt pieces to the same size. The black felt pieces will end up a bit bigger than the colored fabrics. Cut the pink fabric slightly smaller than the black, and the multi-colored slightly smaller than the pink.
2. Stack the pink and the multi-colored fabrics and cut a wavy edge along one of the longer edges.
3. Pull the multi-colored fabric back from the edge, twice as far as the border that you want, keeping it even.
4. Cut the next wavy strip. Do not cut all the way through the top of the pink fabric, but leave it slightly attached.
5. Pull the multi-colored fabric back slightly from the edge again.
6. Continue to cut and readjust the top fabric across the width of the two pieces. Cut the other long edge wavy to finish.
7. Remove the multi-colored pieces, keeping them in order. Iron fusible interfacing to the back of the pink fabric before cutting off the part of the pink fabric that is still attached.
8. Place the multi-colored strips back onto the pink fabric and cut the top and bottom edges in a wavy design.
9. Continue cutting strips crosswise in a wavy pattern. If the multi-colored fabric wants to shift as you cut, anchor it in place with small pieces of double-stick tape.
10. Place the strips carefully on top of a piece of black felt. Pull the strips apart from each other so that the black shows through between rows.
11. Carefully cut the lengthwise strips apart, following the previously made cut marks. Pull the strips apart from each other as in step 10.
12. Use small pieces of double-stick tape to anchor each fabric stack.
Next week - embroidering and finishing the quilt.
Copyright 2012 Cyndi Lavin. All rights reserved. Not to be reprinted, resold, or redistributed for profit. May be printed out for personal use or distributed electronically provided that entire file, including this notice, remains intact.
Technorati Tags:mixed media,collage,assemblage,digital art,photography,altered books,art journals